14B 5S/6S Nut Cold Forging Machine

 

 14B 5/6S Nut Cold Former

14B-5S/6S Nut Cold Former

14B-5S/6S Nut Cold Former 

 

 

Machine Specifications

Model   规格/型号	14B-5S(6S)
Modulus模数	5(6)
Product  Side(mm)   产品对边(m)	10-14
Product  Spcf. 产品规格(din)	M6-M8
Max.cutting  Dia最大切断直径(mm)	14
Max.cutting  Length最大切断长度(mm)	10
Ejection  Length of Rear Bracket后托顶出长度(mm)	20
Center  distance of master mold母模中心距离(mm)	60
Main  Slide stroke主滑块行程(mm)	70
Press  force压造力 (flat)	85
Productivity生产率(pic/min)	180
Motor电机(kw)	15
Dimension外形尺寸(m)	2.82x1.98x1.24
Weight机械重量(kg)	7500

 

 

Application Scope
Five Stations High-Speed Cold Nut Former is one kind of specialized machine with high efficiency and automation among forging machinery. High-Speed Cold Nut Former are used for producing different kinds of self-tapping screws, rivets, hinge pins, and special parts in the field of the fastener industry. Because of the advantage of the cold forging equipment itself and the superiority of the cold forging technique, the Five Stations High-Speed Cold Nut Former also are widely used in different national economic fields for producing fasteners and non-standard parts for the industry of building, aviation steamers, machinery, rail traffic, vehicle, motorcycle, bicycle, sewing machine, construction, furniture, light industry, and daily necessities, etc.

 

Items can be produced by the 14B-5S(M8) Five Stations High-Speed Cold Nut Former

Hex nut, hex fleang nut, round nut, square nut, Cap Nuts, Castle Nuts, Coupling Nuts, Flange Serrated Nuts, Hex Machine Nuts, Keps-K Lock Nuts, Knurled Thumb Nuts, Nylon Hex Jam Nuts, Nylon Insert Lock Nuts, Prevailing Torque Lock Nuts, T-Nuts, Tri-Groove Nuts, Wing Nuts, drop in anchors, Acorn nut, cap nut, Barrel nut, Cage nut, Sleeve nut, Split nut, Swage nut, Weld nut.

Salient Features of 14B-5S(M8) Five Stations High-Speed Cold Nut Former

1. The crankshaft and the body are connected by the best SKF bearings or high wear-resistant alloy copper tiles. The load bearing capacity is large, the service life is long, the maintenance cost is low, the friction resistance is small, the operation is fast and flexible, and much power saving.
2. The body is made of ductile iron with added alloy, which has high tensile strength and good anti-wear resistance.
3. Adopting a two-stage gear transmission system, the transmission efficiency is high and the transmission torque is large.
4. Equipped with pneumatic clutch brake to reduce motor power consumption and easy to operate the machine with inching movement function.
5. The cutting system uses the guide plate driving cutter design, the guide plate reciprocates movement, the cutting force is transmitted linearly, the force is large and steady, and the dynamic balance is good.
6. The transfer finger system can be flipped or translated by 180 degrees. Conducive to the molding process arrangement.
7. Equipped with variable frequency speed control device, can be step-less speed regulation within a certain range.
8. Equipped with a fault detector and safety protection device, it will automatically stop when the equipment fails, and it will protect the equipment and forging die.
9. The feeding box is equipped with a backstop device to improve the feeding accuracy.
10. The main slide of the six-station and seven-station machine adopts the T-type design, the slider operation is more stable, and one more forming station than the five-station, which is more conducive to the processing of products with higher precision and more complicated shapes.
11. The main slider side plates adopt an adjustable design to ensure running accuracy under long-term use.

 

Wuxi Gongbu Fastening Solution Provider

Web:

http://www.gongbu-trade.com/cn/

 

Feb:

https://www.facebook.com/WuxiGongbu

 

Instagram:

https://www.instagram.com/gongbu01/

 

WhatsApp: 

+8615695192515