11B 5/6S Nut Cold Former
 |
| 11B-5S/6S Nut Cold Former |
Machine Specifications
Model 规格/型号 | 11B-5S(6S) | |
Modulus模数 | 5(6) | |
Product Side(mm) 产品对边(m) | 8-11 | |
Product Spcf. 产品规格 (din) | M4-6 | |
Max.cutting Dia最大切断直径(mm) | 10 | |
Max.cutting Length最大切断长度(mm) | 7 | |
Ejection Length of Rear Bracket后托顶出长度(mm) | 15 | |
Center distance of master mold 母模中心距离(mm) | 50 | |
Main Slide stroke主滑块行程(mm) | 50 | |
Press force压造力 (flat) | 55 | |
Productivity生产率(pic/min) | 240 | |
Motor电机(kw) | 11 | |
Dimension外形尺寸(m) | 2.13x1.6x1.03 | |
Weight机械重量 (kg) | 4000 |
Application Scope
Five Stations High-Speed Cold Nut
Former is one kind of specialized machine with high efficiency
and automation among forging machinery. High-Speed Cold Nut Former are used for
producing different kinds of self-tapping screws, rivets, hinge pins, and special
parts in the field of the fastener industry. Because of the advantage of the cold
forging equipment itself and the superiority of the cold forging technique, the Five Stations High-Speed Cold Nut Former also
are widely used in different national economic fields for producing fasteners
and non-standard parts for the industry of building, aviation steamers, machinery,
rail traffic, vehicle, motorcycle, bicycle, sewing machine, construction,
furniture, light industry, and daily necessities, etc.
Items can be produced by
the 11B-5S(M6) Five Stations High-Speed Cold Nut Former
Hex nut, hex fleang nut, round nut, square nut, Cap Nuts, Castle Nuts, Coupling Nuts, Flange Serrated Nuts, Hex Machine Nuts, Keps-K Lock Nuts, Knurled Thumb Nuts, Nylon Hex Jam Nuts, Nylon Insert Lock Nuts, Prevailing Torque Lock Nuts, T-Nuts, Tri-Groove Nuts, Wing Nuts, drop in anchors, Acorn nut, cap nut, Barrel nut, Cage nut, Sleeve nut, Split nut, Swage nut, Weld nut.
Salient Features of 11B-5S(M6)
Five Stations High-Speed Cold Nut Former
1. The crankshaft and the body are connected by the best SKF bearings or
high wear-resistant alloy copper tiles. The load bearing capacity is large, the
service life is long, the maintenance cost is low, the friction resistance
is small, the operation is fast and flexible, and much power saving.
2. The body is made of ductile iron with added alloy, which has high tensile
strength and good anti-wear resistance.
3. Adopting a two-stage gear transmission system, the transmission efficiency is
high and the transmission torque is large.
4. Equipped with pneumatic clutch brake to reduce motor power consumption and
easy to operate the machine with inching movement function.
5. The cutting system uses the guide plate driving cutter design, the guide plate
reciprocates movement, the cutting force is transmitted linearly, the force is
large and steady, and the dynamic balance is good.
6. The transfer finger system can be flipped or translated by 180 degrees.
Conducive to the molding process arrangement.
7. Equipped with variable frequency speed control device, can be step-less speed
regulation within a certain range.
8. Equipped with a fault detector and safety protection device, it will
automatically stop when the equipment fails, and it will protect the equipment
and forging die.
9. The feeding box is equipped with a backstop device to improve the feeding
accuracy.
10. The main slide of the six-station and seven-station machine adopts the
T-type design, the slider operation is more stable, and one more forming
station than the five-station, which is more conducive to the processing
of products with higher precision and more complicated shapes.
11. The main slider side plates adopt an adjustable design to ensure running accuracy under long-term use.
Wuxi Gongbu Fastening Solution Provider
Comments
Post a Comment